Mermaid Technology 213, 240 , 3. Content of the Box: , 4. Unpacking, placement and setup. (PC) , OSD panel is located beneath the monitor

___________________________________________________________________________________

Page 4 of 18

3. Content of the Box:

• ventura 213T (21”) or ventura 240T (24”) monitor

• PSU (80 Watt)

• Powercord

• HQ VGA cable 1,8 meter

• Users manual

• ”Quickstart” card

• Glass cleaner & screen wiping cloth

4. Unpacking, placement and setup. (PC)

After the box has been opened the monitor and side packing can be lifted out.

21”- First remove the outer two side pieces. Then remove the two inner side pieces from the monitor and carefully lift the

monitor out of box.

24”- It will be necessary to lift the monitor and support material out in one op eration.

The monitor needs to be placed on a smooth and stable surface. This surface must be able to safely support 25 kg (213T)

or 30 kg (240T).

Your monitor has been delivered with a standard VGA cable of high quality, intended to be used with standard graphic

boards (analog RGB). If you wish to use DVI, a suitable cable will need to be purchased separately.

Make sure the computer is turned off before connecting the monitor.

• Connect the monitor to the computer, by means of the supplied VGA cable or by means of DVI.

• Connect the PSU to the monitor and AC outlet.

• Turn on the computer and monitor. If nothing happens within approx. 5 seconds, p ress the OSD button #2 (OSD

counted from the right) until the textbox shown at the upper right corner d escribes the input of your choice.

• mermaid 213T and 240T monitors are plug & play compatible via VESA DDC1/2B. Windows 98, ME and XP will

recognise this and self configure.

OSD panel is located beneath the monitor