TIG WELDING SYSTEMS
SOME LIKE IT HOT.
The centrepiece of a TIG welding device is the optimum ignition and control. That makes welding devices real perfectionists: they can handle all metals from 0.3 mm on with direct or alternating current, depending on the material. Your advantage: They are so good at handling the concentrated
some reworking is now a thing of the past. Metabo wel- ding systems are produced as highly dependable tools: Only after successfully passing all air condition, dust chamber and vibration tests and then being checked again thoroughly, do they leave our factory.
e.g. TIG 170 AC/DC
Digital welding current indicator
with automatic nominal and actual value changeover.
“HF ignition”
for
Electrode function
with switch and automa- tic hot start, arc
force control and anti- stick regulation for perfect, even welding results without sticking.
Torch and earth cable can be removed.
Smart intelligence
Infinitely adjustable second current
for protecting the material from overheating.
Automatic finishing device
Infinitely adjustable welding current reduction for a clean welded end.
Continuously adjustable gas post flow time
for perfect gas management.
Sturdy metal housing
with protection class IP 23C for safe use in rough construction site conditions.
Balance control
during TIG AC welding can be adjusted for ideal fusion penetration.
Frequency control
during TIG AC welding can be adjusted for a stable electric arc.
“S mark“
Approved for welding even in narrow spaces with increased electrical risk. Automatic test function with switch for testing the
334
