99-7013 KIT ASSEMBLY
DOUBLE DIN/STACKED ISO UNITS PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
1Cut and remove the center bar from the Radio Housing. (Figure A)
2Snap the Double DIN Brackets to the inside edge of the Radio Housing.
(Figure B)
3Slide the Double DIN or stacked ISO unit(s) into the bracket/radio housing assembly and secure the Double DIN or stacked ISO unit(s) to the assembly using the screws supplied with the unit(s). (Figure C)
4Snap the Double DIN Trim Plate onto the front of the Radio Housing.
(Figure C)
A
B
Continue to final assembly.
C
6
