Metra Electronics 99-7424 installation instructions Nissan Titan

99-7424 DASH DISASSEMBLY

NISSAN Titan 2008-11

A

1Disconnect the negative battery ter- minal to prevent an accidental short circuit.

2Unclip the entire dash panel including the radio and climate controls. Unplug and remove the panel. (Figure A)

3Remove (4) Phillips screws securing the radio chassis. Unplug and remove the chassis. (Figure B)

4Remove (4) T-10 Torx screws securing the climate controls to the dash panel and remove the controls from the panel. (Retain the screws and climate controls for re-use during kit prepara- tion.) (Figure C)

5Remove (2) T-10 Torx screws securing the passenger air bag status light assembly to the dash panel and remove the light from the panel. (Retain the screws and light for re- use during kit preparation.) (Figure C)

NOTE: The small round Airbag sticker also needs to be removed from the fac- tory panel and placed onto the 99-7424 radio housing panel. (A round piece of double-sided tape is provided in case the factory sticker is not strong enough.) (Figure C)

B

C

Continue to kit preparation

1