99-9103

3
FINAL ASSEMBLY

FINAL ASSEMBLY

A
Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter and making the connections as
shown. (Isolate and individually tape off the
ends of any unused wires to prevent electrical
short circuit) Figure A
Re-connect the negative battery terminal and test
the unit for proper operation.
A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
1
2
Snapradio housing assembly into factoryradio
opening.
3
B
C
D