Technical Specifications
Input Power
___________________________
Weight
Environmental
Operating Temperature _____________________ 0º to 50º C
Storage Temperature _____________________
Relative Humidity ___________ 5% to 95%
Dimensions ______________________ 7.5"L x 7"W x 3.5"H
___________ (19.1cm L x 17.8cm W x 8.9cm H)
Radiance
R5000 Power Supply
C | US E116552 | PWR |
| I.T.E. |
|
LISTED | DISCONNECT ALL POWER | |
|
| SOURCES BEFORE SERVICING |
Made | in |
|
| USA |
|
DC IN 48V, 4.9A
Operating Features of the Power Supply
The
When two power supplies are installed in the Radiance R5000 Central Service Platform, they operate in tandem and share the load. If the power source to one of the supplies fails or is removed, the other power supply automatically provides the entire power load to the platform. This setup provides both the platform and the network with uninterrupted service. It also decreases the demand placed upon an individual power supply, thus prolonging its life.
When the power (PWR) LED on the front panel of the power supply is lit, it indicates that the power supply is turned on, connected to an active power source, and providing power to the platform’s backplane. Because they are
The information contained in this document is assumed to be correct and current. The manufacturer is not responsible for errors or omissions and reserves the right to change specifications at any time without notice.
This publication is protected by the copyright laws of the United States and other countries, with all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, translated, transcribed, or transmitted, in any form, or by any means manual, electric, electronic, electromagnetic, mechanical, chemical, optical or otherwise, without prior explicit written permission of METRObility Optical Systems, Inc.
CAUTION
RISK OF ELECTRIC
SHOCK, DO NOT OPEN
C US E116552I.T.E.
LISTED
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
PWR
DISCONNECT ALL POWER
SOURCES BEFORE SERVICING
when two power supplies are installed and active in a single platform, the LEDs on both supplies are lit simultaneously.
An optional display card is available for vis- ible verification of operating status from the front of the platform. The
© 2001 METRObility Optical Systems, Inc. All rights reserved. Printed in USA.
| AC IN |
| |
| |
|
|
| 2A |
WARNING | SETTING 115V |
| FACTORY DEFAULT |
CAUTION
RISK OF ELECTRIC
SHOCK, DO NOT OPEN | THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, |
| OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: |
| (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, |
| AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, |
| INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. |
LEDs indicate that their corresponding power supplies are installed properly, con- nected to an active power source, turned on, and providing power to the platform’s backplane. When two power supplies are in- stalled and active in a single platform, both LEDs are lit simultaneously.
PWR |
A |
B |
Front Panel
Display Card
25 Manchester Street, Merrimack, NH 03054 USA |
| Installation and User Guide |
tel: |
| |
www.metrobility.com |
| |
|
| |
|
|
|
| Models: | |
8/01 |
| |
|
|