Metrologic Instruments TECH 10, 1070 manual Appendix B, Pin Assignments for the Mil spec Connector

APPENDIX B

Pin Assignments for the Mil spec Connector

Each TECH 10®scanner has a 19-pin male Mil spec connector that is on the side of the unit. To connect the scanner to the host device, use a communication cable with a female Mil spec connector. The communication cable may include a power transformer or it may be designed to draw power directly from the host device. This item can be ordered when the scanner is purchased.

The following is a list of the pin assignments. The pin numbers are impressed on the male Mil spec connector The Tech 10® scanners are manufactured by Metrologic at its Blackwood, New Jersey, U.S.A. facility. For easier reference, refer to Figure 5 for pin locations.

PIN FUNCTION

AR Data

BRTS Output

CSignal Ground

DCTS Input

ER Data Return

FRS-232 Output

G Clock in

HClock In Return

J Clock Out

K Shield Ground

L DTR Input

M Clock Out Return

N Power to Scanner & 24 VDC

P Earth Ground

RPower Ground

SRS-232 Input

Figure 5

11