19
SCANNER CONFIGURATION CONFIGURATION MODES
The IS1650 Series scanner has three modes of configuration.
• Bar Codes
The IS1650 can be configured by scanning the bar codes included in the
Metrologic Single-Line Configuration Guide (MLPN 00-02544) or the
Supplemental Configuration Guide (MLPN 00-02281). These manuals can be
downloaded FREE of charge from Metrologic’s website
(www.metrologic.com).
• MetroSet2
This user-friendly Windows-based configuration program allows you to
simply ‘point-and-click’ at the desired scanner options. This program can be
downloaded FREE of charge from Metrologic’s website
(www.metrologic.com) or set-up disks can be ordered by calling
1-800-ID-METRO.
• Serial Configuration
This mode of configuration is ideal for OEM applications. This mode gives
the end-user the ability to send a series of commands using the serial port of
the host system. The commands are equivalent to the numerical values of
the bar codes located in the MetroSelect Single-Line Configuration Guide
(MLPN 00-02544).