IS4910-02 / IS4911-02 Non-Decode Engine Dimensions

The -02 models include two Ø .075" [1.9 mm] blind holes for mounting the engine with self-tapping screws. Two additional M2 x .4 threaded inserts are provided as a secondary mounting option. The threaded inserts are located on tabs that extend from the sides of the engine's chassis. A keying location point is provided on the bottom of the engine to assist with alignment.

Warning: The limited warranty (on page 49) is void if the following recommendations are not adhered to when mounting the engine.

When securing the engine with self-tapping screws:

•Use M2.2 x 4.5 Philips pan head, type AB, steel, zinc clear, trivalent self-tapping screws.

•Do not exceed 1.75 +0.5 in-lb [2.02 +6 cm-kg] of torque during screw installation.

•Use a minimum mount thickness of 0.3 mm.

•Use safe ESD practices when handling and mounting the engine.

When securing the engine by utilizing the M2 threaded inserts:

•Use M2 x 0.4 Philips Pan Head, Type AB, Steel, Zinc Clear, or equivalent screws.

•Do not exceed 2.5 in-lb [2.88 cm-kg] of torque during screw installation.

•Use a minimum mount thickness of 0.3 mm.

•Use safe ESD practices when handling and mounting the engine.

See Figure 10 on page 9 for detailed engine dimensions.

8