Metrologic Instruments IS8000 VISUAL AND AUDIBLE INDICATORS

12

VISUAL AND AUDIBLE INDICATORS

When the scanner is on, the activity of the red and green LEDs

indicate the status of the scanner.

Flashing Red, No Green

During power-up and diagnostic mode.

Steady Red, No Green

Unit has completed power-up, the VLD is emitting

light, and the unit is ready to scan.

Steady Red, Green Flash

When the scanner transmits a successful read, the

green LED will flash. Generally, if the green LED does

not flash, then the bar code has not been successfully

read. If handshaking is being used, the green LED

goes out when proper handshaking has completed.

When the green light turns off, communication to the

host is complete.

Alternating Red and Green with razz tone

This indicates a motor failure.

Steady Red, Green Flashing with a beep

Scanner has entered program mode successfully.

(See Running the MetroSet® 2 Program for more

details on configuring the scanner).

Steady Red, Green Flashes 3 times with 3 beeps

Scanner has exited program mode successfully.

Note: If the scanner has been configured for reverse

LED convention, via MetroSet 2, all mode

indicators described above also reverse.

Contents

Main Page TABLE OF CONTENTS Page I Applications and Protocols S CANNER AND A INSTALLING THE SCANNER TO THE HOST (STANDARD FEATURES) Single HoloTrak Installation HoloTrak Primary/Secondary Feature INSTALLING THE SCANNER TO THE HOST (STANDARD FEATURES) Industrial Controller MX001 Interface Option External Speaker Box Option Hand-held Port Option C ONFIGURATION TO THE H OST S Primary/Secondary Configuration Note I NSTALLING AND R UNNING THE M ETRO S ET 2 P Installation INSTALLING AND RUNNING THE METROSET2 PROGRAM How to Start P ARTS OF THE S c d e f g M OUNTING B RACKET I Mounting Bracket Hole Pattern VISUAL AND AUDIBLE INDICATORS Page IS8300 Depth of Field and Scan Pattern IS8400 Depth of Field and Scan Pattern IS8500 Depth of Field and Scan Pattern IS8800 Depth of Field and Scan Pattern Page T ROUBLESHOOTING G APPENDIX A Design Specifications APPENDIX A (CONTINUED) Design Specifications 22 APPENDIX B Default Settings Page Page Page Page APPENDIX C IS8000 Series Pinout Connections 28 APPENDIX C IS8000 Series Pinout Connections IS8400E/IS8400LE and IS8500E/IS8500LE Scanners Only APPENDIX D Limited Warranty APPENDIX E Notices APPENDIX E (CONTINUED) APPENDIX F Page I CONTACT INFORMATION AND OFFICE LOCATIONS S OUTH A MERICA AND C ENTRAL A MERICA Germany, Austria and Switzerland Brazil So Paulo Outside Brazil So Paulo A SIAN H Asia, Singapore France, Paris China