Metrologic Instruments IS8000 APPENDIX B

22

APPENDIX B

Default Settings

Many functions of the scanner can be configured, or enabled/disabled. The

factory programs the scanner to a set of default parameters. These defaults are

marked with an asterisk (*) in the default column on the following pages.

Unmarked parameters show the unavailability for that protocol. To speak with

the host system properly, the scanner must be configured to match the systems

individual requirements. Not all functions support all communication protocols. If

the protocol supports a function, a check mark appears on the chart.

PARAMETER DEFAULT RS-232 RS-422 LIGHT

PEN

INTERFACE FORMAT

RS-232 (RS-422) *9 9

Light Pen 9

No Comm Test Mode

Only

CODE TYPES

All UPC/EAN *999

Code 39 * 999

Full ASCII Code 39 999

MOD 43 Check on Code 39 999

Code 93 *999

Code 128 * 999

Codabar *999

Interleaved 2 of 5 (ITF) * 999

MOD 10 Check on ITF 999

Do Not Scan EAN-8 999

Do Not Scan EAN-13 999

Do Not Scan UPC-E 999

Do Not Scan UPC-A 999

Paraf 999

UCC Supplemental Codes Special firmware required

2 Digits Supps 999

5 Digit Supps 999

977 (2 Digit Supps) 999

Bookland 999

Redundancy 2 Digits 999

Redundancy 5 digits 999

Require Supps 999

100 msec to find Supps *999

Contents

Main Page TABLE OF CONTENTS Page I Applications and Protocols S CANNER AND A INSTALLING THE SCANNER TO THE HOST (STANDARD FEATURES) Single HoloTrak Installation HoloTrak Primary/Secondary Feature INSTALLING THE SCANNER TO THE HOST (STANDARD FEATURES) Industrial Controller MX001 Interface Option External Speaker Box Option Hand-held Port Option C ONFIGURATION TO THE H OST S Primary/Secondary Configuration Note I NSTALLING AND R UNNING THE M ETRO S ET 2 P Installation INSTALLING AND RUNNING THE METROSET2 PROGRAM How to Start P ARTS OF THE S c d e f g M OUNTING B RACKET I Mounting Bracket Hole Pattern VISUAL AND AUDIBLE INDICATORS Page IS8300 Depth of Field and Scan Pattern IS8400 Depth of Field and Scan Pattern IS8500 Depth of Field and Scan Pattern IS8800 Depth of Field and Scan Pattern Page T ROUBLESHOOTING G APPENDIX A Design Specifications APPENDIX A (CONTINUED) Design Specifications 22 APPENDIX B Default Settings Page Page Page Page APPENDIX C IS8000 Series Pinout Connections 28 APPENDIX C IS8000 Series Pinout Connections IS8400E/IS8400LE and IS8500E/IS8500LE Scanners Only APPENDIX D Limited Warranty APPENDIX E Notices APPENDIX E (CONTINUED) APPENDIX F Page I CONTACT INFORMATION AND OFFICE LOCATIONS S OUTH A MERICA AND C ENTRAL A MERICA Germany, Austria and Switzerland Brazil So Paulo Outside Brazil So Paulo A SIAN H Asia, Singapore France, Paris China