Metrologic Instruments IS8000 Series M OUNTING B RACKET I

MOUNTING BRACKET INSTALLATION

1. Locate the mounting bolts on the sides of the scanner.

2. Align the bolts on the scanner with the channels on the mounting bracket.

3. Slide the unit into place until the scanner bolts sit securely in the bottom of

the channels.

4. Rotate the unit to the desired angle and secure into place with a locking

bolt in the lower slot.

5. Tighten both bolts to secure the scanner in place.

Contents

Main Page ii L C ORPORATE H N ORTH A EUROPEAN, MIDDLE EAST & AFRICAN H USA, NEW JERSEY GERMANY, MUNICH SOUTH AMERICA, BRAZIL SO PAULO GERMANY, MUNICH SOUTH AMERICA, OUTSIDE BRAZIL SO PAULO ITALY, BOLOGNA T ABLE OF C I Applications and Protocols S CANNER AND A INSTALLING THE SCANNER TO THE HOST (STANDARD FEATURES) Single HoloTrak Installation HoloTrak Primary/Secondary Feature INSTALLING THE SCANNER TO THE HOST (STANDARD FEATURES) Industrial Controller MX001 Interface Option External Speaker Box Option Hand-held Port Option C ONFIGURATION TO THE H OST S Primary/Secondary Configuration Note I NSTALLING AND R UNNING THE M ETRO S ET 2 P Installation INSTALLING AND RUNNING THE METROSET2 PROGRAM How to Start P ARTS OF THE S c d e f g M OUNTING B RACKET I Mounting Bracket Hole Pattern VISUAL AND AUDIBLE INDICATORS Page IS8300 Depth of Field and Scan Pattern IS8400 Depth of Field and Scan Pattern IS8500 Depth of Field and Scan Pattern IS8800 Depth of Field and Scan Pattern Page T ROUBLESHOOTING G APPENDIX A Design Specifications APPENDIX A (CONTINUED) Design Specifications 22 APPENDIX B Default Settings Page Page Page Page APPENDIX C IS8000 Series Pinout Connections 28 APPENDIX C IS8000 Series Pinout Connections IS8400E/IS8400LE and IS8500E/IS8500LE Scanners Only APPENDIX D Limited Warranty APPENDIX E Notices APPENDIX E (CONTINUED) APPENDIX F Page I