Metrologic Instruments Laser Scanner EAS D EACTIVATION A, M

23
EAS DEACTIVATION ANTENNA
SW1 and SW2 are the switch banks inside the CheckPoint Device that set the
deactivation range. Metrologic recommends end users program the MS7220 to
the Fixed Low-Density depth of field, so that the unit does not scan out beyond
the deactivation range.
Unit # CheckPoint Recommended
Switch Bank Settings
MS7220 Depth of Field
Settings
MS7320 SW1 & SW2
switches 2, 3, 4, 5, and 6 set to ON Default
*Note: Minimum element width changes to 6.8 mil when in this mode.
Figure 14: EAS Deactivation Antenna
Contact Checkpoint Systems directly for additional EAS support.
MAINTENANCE
Smudges and dirt can interfere with the proper scanning of a bar code.
Therefore, the output window will need occasional cleaning.
1. Spray glass cleaner onto lint free, non-abrasive cleaning cloth.
2. Gently wipe the scanner window.