33
DEFAULT SETTINGS
Many functions of the scanner can be "programmed" - that is, enabled or
disabled. The scanner is shipped from the factory programmed to a set of
default conditions. The default parameter of the scanner has an asterisk
( * ) in the charts on the following pages. If an asterisk is not in the default
column then the default setting is Off or Disabled. Every communication does
not support every parameter. If the communication supports a parameter listed
in the charts on the following pages, a check mark will appear.
PARAMETER DEFAULT OCIA RS-232 LIGHT
PEN
IBM
46XX KBW USB
UPC/EAN *aaaaaa
Code 128 *aaaaaa
Code 93 *aaaaaa
Codabar *aaaaaa
Interleaved 2 of 5 (ITF) *aaaaaa
MOD 10 Check on ITF aaaaaa
Code 11 aaaaaa
Code 39 *aaaaaa
Full ASCII Code 39 aaaaaa
MOD 43 Check on
Code 39 aaaaaa
MSI-Plessey aaaaaa
Airline (15 Digit) 2 of 5 aaaaaa
Airline (13 Digit) 2 of 5 aaaaaa
Matrix 2 of 5 aaaaaa
Telepen aaaaaa
UK Plessey aaaaaa
STD 2 of 5 aaaaaa
MSI-Plessey 10/10 Check Digit aaaaaa
MSI-Plessey MOD 10 Check
Digit *aaaaaa
Paraf Support aaaaaa
ITF Symbol Lengths Variable aaaaaa
Minimum Symbol Length 4 aaaaaa
Symbol Length Lock None aaaaaa
Bars High as Code 39 *a