30
DEFAULT SETTINGS – COMMUNICATION PARAMETERS
Many functions of the scanner can be “configured” – that is, enabled or disabled.
The scanner is shipped from the factory configured to a set of default conditions.
The default parameter of the scanner has an asterisk (*) in the charts on the
following pages. If an asterisk is not in the default column then the default setting
is OFF or DISABLED. Every interface does not support every parameter. If the
interface supports a parameter listed in the charts on the following pages, a
check mark (9) will appear.
PARAMETER DEFAULT RS232 RS485S KBW USB
Multi-Try Trigger Out-of-Stand * 9 9 9 9
Presentation Mode In-Stand * 9 9 9 9
Continuous Trigger 9 9 9 9
Single Trigger 9 9 9 9
Aiming in
Trigger and Continuous Modes * 9 9 9 9
Aiming in Presentation Mode 9 9 9 9
Long-Range In-Stand * 9 9 9 9
Short-Range In-Stand 9 9 9 9
Long-Range Out-of-Stand * 9 9 9 9
Short-Range Out-of-Stand 9 9 9 9
UPC/EAN * 9 9 9 9
Code 128 * 9 9 9 9
Code 93 * 9 9 9 9
Codabar * 9 9 9 9
Interleaved 2 of 5 (ITF) * 9 9 9 9
MOD 10 check on ITF 9 9 9 9
Code 11 9 9 9 9
Code 39 * 9 9 9 9
Full ASCII Code 39 9 9 9 9
PDF * 9 9 9 9
Data Matrix 9 9 9 9
QR Code 9 9 9 9
S Applicable for IBM® Host applications.