16
SCALE/LOAD CELL CONFIGURATION BAR CODES
Dual Cable Scale Configuration Bar Codes
COM Port Settings (Data Bits & Parity)
The following bar codes will change scale parameters intended for a
Dual Cable environment.
If a Scale Protocol bar code from page 11 or 13 is used, the bar codes
below must be scanned after the Scale Protocol bar code in order to be
effective.
The MS2xx0 must be in scale program mode to use these bar codes.
Scale = 7 Data Bits,
Odd Parity
³996021
Set the scale communication parameters to
7 data bits, odd parity.
Scale = 7 Data Bits,
Even Parity
³996022
Set the scale communication parameters to
7 data bits, even parity.