Metrologic Instruments MS7120 I NSTALLING THE O PTIONAL WALL/COUNTER M

INSTALLING THE OPTIONAL WALL/COUNTER MOUNT

a. Locking Plate

[MLPN 50-50302] ............................Qty. 1

b. Base Cover

[MLPN 50-50301] ............................Qty. 1

c. Wood Screw, #7 x 1.00”

[MLPN 18-18013] ............................Qty. 3

d. Flathead Screw, M3 x 8 mm

[MLPN 18-18004] ............................Qty. 4

1. Drill mounting holes

Note the position Orbit will rest (fig. 2).

Use the dimensions provided in

figure 2 or the locking plate

[MLPN 50-50302] as a template to drill

three #39 pilot holes.

2. Mount locking plate to wall/counter

Secure the locking plate [MLPN 50-50302] to

the counter or wall with the three #7 x 1.00” wood

screws [MLPN 18-18013] provided.

3. Attach the base plate to Orbit

Secure the base cover [MLPN 50-50301] to the bottom of Orbit (fig. 4)

using the four M3 x 8 mm screws [MLPN 18-18004] provided.

4. Mount Orbit to locking plate

Hold Orbit 90° clockwise from the desired position then lower it over

the locking plate until it sits flush to the countertop. Twist Orbit counter

clockwise 90°, as shown in figure 5, to lock unit in place.

Fig. 1

Position Indicators Fig. 2

Fig. 3

Fig. 4 Fig. 5