31
DEFAULT SETTINGS
Many functions of the scanner can be "programmed" - that is, enabled or
disabled. The scanner is shipped from the factory programmed to a set of
default conditions. The default parameter of the scanner has an asterisk
( * ) in the charts on the following pages. If an asterisk is not in the default
column then the default setting is Off or Disabled. Every communication
does not support every parameter. If the communication supports a
parameter listed in the charts on the following pages, a check mark will
appear.
Parameter Default OCIA RS-232 Light
Pen
IBM
46XX KBW
UPC/EAN *aaaaa
Code 128 *aaaaa
Code 93 *aaaaa
Codabar *aaaaa
Interleaved 2 of 5 (ITF) *aaaaa
MOD 10 Check on ITF aaaaa
Code 11 aaaaa
Code 39 *aaaaa
Full ASCII Code 39 aaaaa
MOD 43 Check on
Code 39 aaaaa
MSI-Plessey aaaaa
MSI-Plessey 10/10
Check Digit aaaaa
MSI-Plessey MOD 10
Check Digit *aaaaa
Paraf Support aaaaa
ITF Symbol Lengths Variable aaaaa
Minimum Symbol
Length 4aaaaa
Symbol Length Lock None aaaaa
Bars High as Code 39 *a
Spaces High as Code 39 a
Bars High as Scanned a
Spaces High as
Scanned a
DTS/SIEMENS a