Metrologic Instruments MX009

CONFIGURING FOR USB KEYBOARD EMULATION (MX009-2XX7X)

PowerLink Compatible Scanners

These Metrologic Scanners, used with the MX009 Cable must be reconfigured

using the following bar codes before the MX009 can communicate properly with

a host system.

• MS9500 Voyager® Series • MS6220 Pulsar®

• MS7100 Orbit® • MS3580 QuantumT™

• MS7220 ArgusSCAN® • IS3480 QuantumE™

• MS6520 Cubit® • IS4225 ScanGlove™

• IS6520 Cubit® • All MetroSelect Compatible Scanners

Note: Configuration for USB Keyboard Emulation must be completed before

enabling/disabling any additional features documented in the

configuration guide provided with the scanner.

Important: When enabling/disabling additional features do not scan the

Recall Defaults bar code. If the Recall Defaults bar code is

scanned, all USB Keyboard Emulation configurations will

be lost and the process will have to be restarted.

Scan the following bar codes in numbered sequence.

ENTER/EXIT

CONFIGURATION MODE

³999999

RECALL DEFAULTS

³999998

LOAD USB DEFAULTS

³999978