mecablitz. Find the required working aperture
using the aperture calculator on the mecablitz.
Then set on the camera this working aperture or
the aperture that comes closest to it.
In the “M”manual camera mode it is additionally
necessary to set a shutter speed that equals,or is
slower than the camera's fastest flash synch
speed. Use a tripod for slow shutter speeds to
prevent camera shake.
mecablitz 45 CL-4 digital, 50 MZ-5, 54 MZ-...,
70 MZ-.. and 76 MZ-5:
The camera automatically transmits the adjusted
aperture to the mecablitz. Set the appropriate
aperture/partial light output combination
(camera/mecablitz) to determine the required
flash-to-subject distance. The distance for a
correct exposure is indicated on the LC-display of
the mecablitz and is adapted to the aperture and
partial light output setting.
In the “M”manual camera mode it is additionally
necessary to set a shutter speed that equals,or is
slower than the camera's fastest flash synch
speed. Use a tripod for slow shutter speeds to
prevent camera shake.
Note:
The “M”mode of the flash unit is not supported by
the EOS 700 / 750 / 850 / 5000 cameras.Please
refer to the operating instructions for the given
camera!
With some digital cameras,the operating mode
"M" of the mecablitz is only possible if the manual
mode "M" is selected on the camera.
17