2.1 Full auto flash mode/Program flash
In the full auto flash mode the camera controls the
aperture and shutter speed so that in most lighting
situations optimal results are achieved with
mecablitz flashes,also in the fill-in flash mode.
Setting the camera:
Set the “P”program mode or “Full Auto Mode”
(green square or Auto) on your EOS camera.
Setting the flash unit:
Set the “TTL”or „ETTL“ mode on your flash unit.
Please observe the remarks under 3.1 and
3.2 when using digital cameras !
Setting the SCA 3102 adapter:
The switch positions on the adapter and the display
are irrelevant when using the 3102 adapter
with the mecablitz 44 MZ-2,45 CL-4 digital, 54
MZ-..., 70 MZ-... or 76 MZ-5.
If the adapter is used with other mecablitz flash
units,the switches must be adjusted as follows:
• To select the mode of synchronisation set switch
to the left-hand position (first-curtain
synchronisation).
• The two switches
and
for exposure
correction must be set to the “0”middle position
(default setting).
In most cases,the “P”program mode and full auto
mode (green square) of the camera and use of your
mecablitz in conjunction with the SCA 3102
adapter automatically ensure optimal flash
exposure of the subject.
☞
8