Meyer Sound M3D D, , C, A, , ISO/IEC G, , EN 45014

D

ECLARATION

OF

C

ONFORMITY

A

CCORDING

TO

ISO/IEC G

UIDE

AND

EN 45014

The Manufacturer:

Meyer Sound Laboratories, Inc.

2832 San Pablo Avenue

Berkeley, California 94702-2204, USA

Declares that the product: M3D™, M3D-Sub

Conforms to the following Product Specifications

Safety: EN60065: 1998

IEC60065: 1998

EMC: EN55103-1: 1997 emission(1)

EN55103-2: 1997 immunity(2)

This device complies with the requirements of the Low Voltage

Directive 73 / 23 / EEC and the EMC Directive 89 /336 / EEC.

This device also complies with EN 55103-1 & -2. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Environmental Specifications For Meyer Sound Electronics

Products:

Operating Temperature 0˚C to + 45˚C

Nonoperating Temperature <-40˚C or > +75˚C

Humidity to 95% at 35˚C

Operating Altitude to 4600 m (15,000 ft)

Nonoperating Altitude to 6300 m (25,000 ft)

Shock 30g 11 msec half-sine on each

of 6 sides

Vibration 10Hz to 55Hz (0.010m

peak-to-peak excursion)

OPYRIGHT

M3D Line Array Loudspeaker Operating Instructions.

The contents of this manual are furnished for informational purposes only, are subject to change without notice, and should not be

construed as a commitment by Meyer Sound Laboratories, Inc. Meyer Sound assumes no responsibility or liability for any errors or

inaccuracies that may appear in this manual.

Except as permitted by applicable copyright law, no part of this publication may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, recording or otherwise, without prior written permission from Meyer

Sound.

M3D™, TruPower™, RMS™, BroadbandQ™, MAPP Online™ and REM™ are trademarks of Meyer Sound. SIM

and QuickFly

are registered

trademarks of Meyer Sound (Reg. U.S. Pat. & Tm. Off.). All third-party trademarks mentioned herein are the property of their respective

trademark holders.

Printed in the U.S.A.

Part Number: 05.105.022.01 Rev. A (08/02)

Office of Quality Manager

Berkeley, California USA July 19, 2002

European Office:

Meyer Sound Lab. GmbH

Carl Zeiss Strasse 13

56751 Polch, Germany

Made by Meyer Sound Laboratories

Berkeley, California USA

3K59 COMMERCIAL

AUDIO SYSTEM