CHAPTER 1

NOTE: For best performance, the AC cable voltage drop should not exceed 10 volts, or 10 percent at 115 volts and 5 percent at 230 volts.

Make sure that even with the AC voltage drop the AC voltage always stays in the operating windows.

The minimum electrical service amperage required by the M2D-Sub system is the sum of each loudspeaker’s maximum continuous rms current. An additional 30 percent above the minimum amperage is recommended to prevent peak voltage drops at the service entry.

CAUTION: In the unlikely event that the circuit breakers trip (the white center buttons

pop out), disconnect the AC power cable. Do not reset the breakers with the AC connected. Contact Meyer Sound for repair information.

CAUTION: The M2D and M2-Sub loudspeakers require a ground connection.

Always use a grounded outlet and plug.

7