
APPENDIX B
Input level | Audio source must be capable of producing a minimum of +20 dBV (10 V rms, 14 V pk) | |
| into 600 ohms in order to produce maximum peak SPL over the operating bandwidth of the | |
| loudspeaker. |
|
AMPLIFIERS |
|
|
Amplifier type | ||
Output power | 2250 W total |
|
| Note: Wattage rating is based on the maximum unclipped burst | |
| amplifier will produce into the nominal load impedance — both channels 67 V rms (95 V pk). | |
THD, IM TIM | < .02% |
|
Load capacity | 4 Ω each channel |
|
Cooling | Forced air cooling, 2 fans total (1 | |
AC POWER |
|
|
AC power connector | PowerCon or VEAM |
|
Voltage selection | Automatic, two ranges, each with | |
Safety agency rated | 95 V AC - 125 V AC; 208 V AC - 235 V AC; 50/60 Hz | |
operating voltage |
|
|
Turn on/turn off points | 85 V AC - 134 V AC; 165 V AC - 264 V AC; 50/60 Hz | |
Current Draw |
|
|
Idle current | 0.640 A rms (115 V AC); 0.320 A rms (230 V AC); 0.850 A rms (100 V AC) | |
Max. | 8.8 A rms (115 V AC); 4.4 A rms (230 V AC); 10 A rms (100 V AC) | |
current (>10 sec) |
|
|
Burst Current (<1 sec) | 19 A rms (115 V AC); 9.5 A rms (230 V AC); 22 A rms (100 V AC) | |
Ultimate | 39 A pk (115 V AC); 20 A pk (230 V AC); 45 A pk (100 V AC) | |
current draw |
|
|
Inrush current | 7 A pk (115 V AC); 7 A pk (230 V AC); 10 A pk (100 V AC) | |
RMS NETWORK |
|
|
| Equipped for two conductor | |
| amplifiers to system operator’s host computer. |
|
PHYSICAL |
|
|
Enclosure |
| |
Finish | Black textured |
|
Protective grille |
| |
Rigging | Patented QuickFly | |
Dimensions | 39.00" w x 24.00" h x 17.50" d (991 mm x 610 mm x 445 mm) | |
| 24.00 | 21.86 |
| [610 mm] | [555 mm] |
| 11.25 |
|
| [286 mm] |
|
37.00
[940 mm]
39.00
[991 mm]
17.50
[445 mm] 8.50
[216 mm]
19.50
[495 mm]
Weight | 173 lbs (78.47 kg); Shipping: 197 lbs (89.35 kg) |
32