APPENDIX A

APPENDIX A: OPTIONAL RAIN HOOD

In weather-protected versions, a rain hood is included to safeguard the user panel and connectors from the elements.

INSTALLING THE M’ELODIE QUICK-CLIP RAIN

HOOD

1.Check the rain hood to assure that the gasket material is firmly attached along all the inner edges. If not installed, install the gasket to the rain hood; do not install the gasket to the user panel.

2.Holding the rain hood at a slight angle away from the enclosure, rotate the top (long) edge of the hood into the slot in the user panel. Push the hood upward into the slot until it stops.

3.Move the hood toward the enclosure until it makes contact and its side edges are within the pin receiving holes on the left and right sides of the user panel. Press in to compress the foam against the enclosure.

4.Holding the rain hood in place, insert the black button pins (5/16" x 0.63") one at a time into their mating holes on the two sides of the user panel. Once the pins are inserted, check that they are locked.

5.To remove the rain hood, reverse steps 4 through 2.

31