APPENDIX B

APPENDIX B: OPTIONAL VEAM MULTIPIN CONNECTOR

The M’elodie loudspeaker requires a grounded outlet. It is very important that the system be properly grounded in order to operate safely and properly. Figure B.1 illustrates correct wiring for the creation of power cables and distribution systems for M’elodie loudspeakers shipped from the factory with the VEAM multipin connector.

line (brown)

For complete wiring conventions and pin-outs for AC, audio, and RMS connections please refer to the Meyer Sound document VEAM Cable Wiring Reference (PN 06.033.113).

In addition, Meyer Sound offers the VIM-4 (VEAM interface module) with four VEAM connectors in the front and a single-phase IEC 309 32-amp connector in the rear to distribute power, audio, and RMS to M’elodie loudspeaker systems fitted with VEAM connectors.

ground (green/yellow)

neutral (blue)

Figure B.1. VEAM multipin connector power pin-out

Figure B.2. VIM-4 module, front (top) and rear (bottom)

32