EX RT CLA Module
STEP 3 EX RT CLA Module Rack Configuration (Requires optional Rail Kits 86001, 86002. See System Installation and User Manual for details.)
A. Prepare the front panel logo and LCD display for rack orientation, |
| |
Apply to all modules. Power Module shown. | ||
|
FINISHED PANEL (rack orientation)
1 | 1 |
| |
2 | 2 |
3
3
EX RT Trans | former |
| |
EX 11 RT |
|
1.EX RT CLA MODULE (Top, EX 5/7/11 RT)
2.POWER MODULE (bottom, EX 5/7/11 RT)
B. Rack Installation
1 | 1. Attach both rails to rear and front | |
of rack chassis with supplied screws. | ||
|
1
1 | 3. Install Front Mounting Brackets | |
to each side of the CLA Module. | ||
|
1
3 |
2
|
| 4 |
2. Attach rails together | 3 | 4 |
|
|
with provided wing nuts.
4.Use caution when sliding unit into rack mount, secure unit to rack with supplied screws.
(For this step, it is possible to adjust the position of both front mounting brackets.)
4 | EX RT CLA Module Installation |
