MicroBoards Technology Premium Pro Copy Hard Drive (HDD) to Disc , Clearing the Hard Drive (HDD)

DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC

MASTER SELECT?

(DISC)

COPY START?

(HDD1 to DISC)

READER?

(DISC to DISC)

MASTER CLEAR?

(HDD)

11. Once the Master disc has been copied to the HDD, the Reader drive will eject the disc.

When you go back into the MASTER SELECT? Menu, and select a partition with data

stored on it, the display will show the type of data (ROM or Video) and the capacity of

that data. Proceed to COPY HDD TO DVD section.

Copy Hard Drive (HDD) to Disc

1. Follow the instructions on page 10 to register the Master to the HDD.

2. Press to NO or ▼ button until the screen displays

3. Press the YES button.

4. The display will show READER.

5. Press the NO or ▼ button and the display will show HDD1. If this is the hard drive

partition you wish to copy, press the YES button.

6. The screen will display COPY START? (HDD1 to DISC)

7. If you wish to select a different hard drive partition, press the NO or ▼ button in step 5,

unit the display shows the partition you wish to copy.

8. Place the blank disc(s) into the Recorder(s) and wait 10 seconds for the light(s) on the

front of the Recorder(s) to stop blinking.

9. Press the YES button. If you have the Auto Run feature set to ON, the duplication will

begin when all drives are loaded with blank media.

10. The drive trays will open on any recorder without blank discs installed. If you do not want

to make a copy in those drives, close the tray(s), wait for the drive light to go out, and

then press the YES button to start the copy job.

11. The display will now show the progress of the copy job from the HDD to the Recorder(s):

12. After the Copy job is complete, the disc(s) will be ejected from the Recorder(s).

Clearing the Hard Drive (HDD)

The Master Clear option will not appear if there is no information stored on any of the hard drive

partitions.

1. At the COPY START? (HDD1 to DISC) menu, press the NO or ▼ button until the display

shows MASTER SELECT? (HDD1 to DISC).

2. Press the YES button.

3. The display will show:

4. Press the NO or ▼ button until you the screen displays MASTER CLEAR? (HDD):

5. Press the YES button

6. You can now select which hard drive partition to erase. Pressing the NO or ▼ button will

scroll you though the partition selections.

COPY 4.0GB

DVD 25%