Functions
There are 9 different functions for the
Copy (NOTE: For CD+G duplication, please see pages |
| |
The Copy function is used to copy our master disc to the blank media, | ||
| ||
1. Copy | ||
| ||
Place your master disc into the TOP CD reader drive. |
| |
| ||
Place your blank media into the BOTTOM CD writer drive. |
| |
Press the ENT button on the controller interface. | Copying – 52x | 18% |
The data will now be copied to the blank disc. | 150.4MB | 01:15 |
|
| |
|
|
|
When the job is completed, the recorded disc will be ejected from the BOTTOM drive.
The display will read:
Test
1.0Copy
OK: 01
The Test function is used to simulate copying our master disc to the blank media,
In Test mode, the blank media will remain blank and can be used again.
Place your master disc into the TOP CD reader drive. |
|
|
Place your blank media into the BOTTOM CD writer drive. |
|
|
Press the ENT button on the controller interface. | Testing – 52x | 18% |
| ||
The duplicator will now simulate writing to the blank disc. | 150.4MB | 01:15 |
When the job is completed, the recordable disc will be ejected from the BOTTOM drive.
The display will read:
2.0Test OK: 01
Test & Copy
The Test and Copy function will perform both operations, one after the other. If the Test portion passes without errors, the system will automatically start the Copy process.
To run the Test and Copy function, press the ▼▲ buttons | until the | 3. | Test & Copy | ||
display reads: |
|
|
|
|
|
Place your master disc into the TOP CD reader drive. |
|
|
|
|
|
Place your blank media into the BOTTOM CD writer drive. |
|
|
|
|
|
Press the ENT button on the controller interface. |
|
|
|
|
|
| Testing – | 52x | 18% | ||
The duplicator will now simulate writing to the blank disc. |
| ||||
| 150.4MB |
| 01:15 | ||
9 |
|
|
|
|
|
|
|
|
|
| |
