![](/images/new-backgrounds/1329622/3296221x1.webp)
Explorer 100 Series – TX716A – POCKET TRANSMITTER - Quick User Guide
Modulation Level | Mic Level Control |
Indicator |
|
Antenna Socket
Battery Status Indicator
(5) Check TX battery status LED, if
(4) Switch on TXRED replace battery with a new one (by connecting microphone
cable to
Setting Up Procedure:
(1) Connect provided TX antenna
(3) Set your TX frequency same as RX
please note: to change frequency turn unit on/off
(6) Check RX ‘Active’ Received Signal Strength Indicators – a LED should be
GREEN
(8) NOW YOUR SYSTEM IS READY TO USE.
Audio Input Socket
(7)Adjust LEVEL gain control, while the performer speaks at correct level so that AF Peak LED comes on all the time, then set gain back by two notches at which AF Peak LED flashes occasionally.
(2)Fit a PP3 9V battery, check RX battery status LED
Please watch polarity of battery.
The battery compartment is opened by pressing the button on the back of the unit. There is a slot for the 9V battery to fit into.
The battery can easily be |
|
released with the aid of the | Battery Life approx. 6 |
thumb. | hours |
|
|