SETUPYOURBIGBUTTONPADS
Before you can use your Xbox 360 Big Button Pads with your Xbox 360 console, you need to:
Insert batteries. The Big Button Pad uses only AA disposable, alkaline batteries.
2Insert the infrared receiver cable into one of the console’s controller ports.
InsertBatteries
To insert batteries into the Big Button Pad:
Remove the battery cover.
2Insert two new alkaline AA (LR6) batteries as shown on the underside of the battery cover. For best performance, do not use rechargeable batteries.
3Replace the battery cover.
ConnectYourBigButtonPads
Up to four Big Button Pads can be actively connected to a console at one time. Plug the
infrared receiver cable into an open controller port on your Xbox 360 console. Then position the receiver so that all pads have a clear line of sight to the receiver.
Tip
For best results, place the infrared receiver above or below your TV.
To disconnect all Big Button Pads, remove the infrared receiver cable from the console.
TurnYourConsoleonwitha
BigButtonPad
To turn on your console with a Big Button Pad, point any Big Button Pad at the infrared receiver and press and hold the Xbox Guide button or the Start button.
TurnYourConsoleoffwitha
BigButtonPad
To turn your console off, point any Big Button Pad at the infrared receiver and press and hold the Xbox Guide button for three seconds.
nOTEs
•When you turn off your console, as long as the infrared receiver cable is still connected, your Big Button Pads will work the next time you turn the console on.
•Big Button Pads work within a
english
3 |
