Microsoft PB10ZUM, OMPB10VWM manual Photo settings, Resolution, Mode, Flash, Lighting

Photo settings

From the Capture photo screen, tap Settings. The Photo Capture settings screen opens, where you can manually adjust these settings:

Resolution	Choose from:
	•	Large - Full-size resolution, largest file size and best quality.
	•	Medium - A compromise between the best and lowest quality. Good for sending.
	•	Small - The smallest file size, but lowest quality. Best for sending.
	Note: The currently-set resolution doesn’t display on the capture screen, so if you
	temporarily change the resolution for a capture session, be sure to change it back.
Mode	Choose from:
	•	Auto - Automatically adjusts exposure based on scene.
	•	Night - Adjusts the exposure for night lighting.
	•	Burst - Raises the shutter speed, turns off the flash, and enables burst capture.
		When you start capture in this mode, the camera will take three successive photos
		without flash and preview the last image captured when finished.
Flash	Choose from:
	•	Auto - Flashes when the camera senses the need.
	•	Off - Never flashes.
	•	Always on - Always flashes, except in Burst mode.
Lighting	Choose from:
	•	Auto - Automatically senses the ambient light and adjusts.
	•	Home - Adjusts to an incandescent light environment.
	•	Office - Adjusts to a fluorescent light environment.
	•	Sunny - Adjusts to a bright light environment.
	•	Cloudy - Adjusts to muted light environment.

ONEm User Guide - R1.0.2 - October 20, 2010 66