Microsoft SP5100/S 4. Configuring the IP-Phone Telnet command lines

4. Configuring the IP-Phone Telnet command lines
After setting the IP Address of IP-Phone and reboot, (please refer to LCD Menu: 5-3.4.5),
user can enter into Telnet command lines.
Note:
● After user enter IP-Phone configuration via telnet, please use login: ”root”,
password: null, press enter to enter command lines.
● User must input lower-case command, but contents of configurations such as SIP
alias or user name etc, user can set as capital case.
● After any change of configuration, please remember to do commit command to
save changes and then reboot command to reboot system.
4.1. [help] command
Type help or man or ? to display all the command lists. The following figure is shown all
commands of IP-Phone .
4.2. [quit] command
Type quit / exit / close will logout IP-Phone and close Telnet Program.
38