MidiLand S4 3050M Features, Connections, Watt Rms Integrated Power Amplifier, 6½” 165mm SUBWOOFER

FEATURES

!50 WATT RMS INTEGRATED POWER AMPLIFIER

!6½” (165mm) SUBWOOFER

!2½” (65mm) WIDEBAND SATELLITE SPEAKERS

!COMPLETE MAGNETIC/VIDEO SHIELDING

!EXTERNAL LOW-NOISE AC ADAPTER

!DNAMIC SOUND QUALITY

!WALL MOUNT CAPABILITY

CONNECTIONS

3	With the power switch in the off position and the AC adapter plug not connected, refer to the instructions and
	illustrations below.

•Using the supplied RCA speaker cable connect the left and right satellite speakers to the subwoofer amplifier’s output. The connection terminals are simple plug-in type, needing only to be concerned with connecting the Left output to the Left speaker and vice-versa. Refer to illustration I-1.

•In the package please locate a 4’ stereo 3.5mm plug audio cable. This cable is intended to connect a computer’s sound card, a portable CD player, or wherever a source with a 3.5mm jack is required to the amplifier’s inputs. Using the 4’ cable, simply plug one end into the source’s output jack and connect the other end into the amplifier’s input. Refer to illustration I-1.

•Power is supplied to the S4 MidiLand™ 3050M via a supplied external AC adapter. The correct voltage adapter is supplied for the territory you purchased the unit in. First, make sure the on/off LED located on the subwoofer’s front panel, is not “ILLUMINATED”. Second, connect the coaxial power plug into the labeled power receptacle on the rear of the subwoofer. Third, connect the country specific corded plug into an approved and properly function- ing AC wall outlet. DO NOT use an extension cord or an overly crowded wall plate.

4