From the clock display:

1.Press and release the FUNC/SNOOZEonce to change from clock to alert display.

You will see on the display in most cases NO MESSAGEscrolling across the screen. This message will depend on if you have received any alerts recently. Above the message you will see on the right center of the display “COUNTYfollowed by a number (1-9) (as described earlier). This number is the county/channel location presently in use.

2.Press and hold SETbutton until you see six digits on the display. The number next to the word COUNTYwill flash.

The six numbers are the county (fips) code. Refer to the instructions above on how to acquire the FIPS code

2.Press the UPbutton to select the county code/memory location you desire (1-9). This number will flash indicating you are able to change that digit.

There are nine county code/channel memory locations available. Each location can have a different county code and channel if desired.

4.Press and release the set button. The first digit of the county code will flash indicating you are able to change that digit.

Each press of the SETbutton will allow you to change each digit with the “UP/DOWNbuttons on the side of the radio. The digits will flash indicating you can change that digit

5.Press and release the UP/DOWNbuttons to change the digit.

6.Press and release the SETbutton to move to the next digit.

9

Page 9
Image 9
Midland Radio 74-250(C) manual From the clock display