f. “M.SC H/L Button”; To change between high and low power, press and release the H/L button.
To scan only the 5 channels in memory locations 1 through 5, press the “F” function button and release, then press and release the “M.SC” button. To stop memory scan, press the up, down, or PTT button.
HOW TO OPERATE YOUR TRANSCEIVER FOR CB
1.Insert the antenna in the antenna connector.
2.Insert 6 alkaline or
3.Rotate the ON/OFF volume control clockwise to turn the unit on. Adjust the volume for a normal listening level.
4.Adjust the SQUELCH control.
5.Select the desired channel by the up or down buttons.
An optional mobile adapter is available that will transform your
Check with your Midland dealer or the Midland factory.
Note: If the channel will not change, check that the “LOCK” button has not been pressed. In this case, press the the “LOCK” button to deactivate this function.
To transmit: press and hold the PTT button, then talk into the microphone.
To receive: simply release the PTT button.
TO RECEIVE WEATHER
Press the WX, button then select one of the channels in your area from the 10 channels available.
CAUTION: DON’T EXPOSE THE DISPLAY TO EXTREME HOT OR COLD TEMPERATURES
CARE OF RECHARGEABLE NI-CAD BATTERIES
Always follow the battery manufacturers recommendations for charging and disposing of
The following is meant as general information regarding
1.Occasionally allow the batteries to fully discharge before recharging. Full discharge will be indicated by the low battery indicator coming on during receive operation.
2.Always allow the battery to fully charge before using.
3.The above will prevent the batteries from developing “memory” which effectively reduces their capacity.
4.It is better to store
