Midland Radio WR-10 manual Controls, Alarm

CONTROLS:

1.

2.Alert Test Button – This is a momentary switch bar. Pressing and holding it down lets you check to see that your WR-10 tone coded alert system is operating. A loud siren-type sound will be emitted from the speaker if the ALERT switch is set to LED &

ALARM.

3. Alert Bar Button – This is a push on switch. It switches the special alert tone coding system on so you can receive emergency weather broadcasts. In the

AM-FM mode it also acts as the on switch for the AM-FM radio if you have activated the weather receiver.

4.Alert LED Indicator – This light emitting diode visual indicator tells you when the unit is in the alert mode. It is normally a steady light. If an emergency broadcast is received this indicator will pulse on and off.

5.Tuning Dial – This dial lets you select AM or FM stations

6.WX-AM-FM Mode Switch – Lets you select AM broadcasts, FM

broadcasts or weatherband broadcasts

7.Telescopic Antenna – Extends fully for best reception.

8.Off/On/Volume Control – This is the volume control and the main power switch. It lets you adjust volume to the desired listening level.

9.External Alert Device Jack – Allows connection of external alerting devices such as X-10.

10.External Antenna – Allows you the option to plug in an optional external antenna for better reception inside your home or car, or from distant weather stations.

11.Power Jack – A power jack is located on the side of the unit for use with an AC

adapter or optional 12 Volt adapter.

12. Weather Channel Selector Switch – Allows you to select the proper weather channel for your area. This switch is recessed on the bottom of the unit and

4