Model XT511 Series | ® |
XT511 QUICK REFERENCE CHART
Channel | MENU | Privacy | Power |
1~22 |
|
| H/L |
WX Channel | WX Alert | CTCSS | oF~38 |
| On/Off | DCS | oF~83 |
1~10 |
|
|
VOX | Call Alert | Roger Beep | Silent Operation | Dual Watch | Privacy |
oF/1/2/3 | oF/1~5 | On/Off | On/Off | 1~22 |
|
CTCSS 
oF~38
DCS 
oF~83
Only when Dual Watch is ON
Hour Setting 
Minute Setting 
Alarm Setting 
Minute Setting
12hr AM/PM | 0~60 | 0~60 | 0~60 |
Clock/Alarm Clock Function
CHANNEL SELECTION (GMRS/FRS BAND)
Turn the TUNING knob clockwise or
MONITOR
Pressing the MONITOR button will let you check activity on your current channel before transmitting. This could also be used to adjust the volume level of the radio when it is not receiving a signal.
Press the MONITOR button again to get out of MONITOR mode.
SCAN
Your XT511 Series can scan all 22 channels for any activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 22 channels and stop on any active channel. Your radio will stay on the active channel as long as the signal is present and will resume scanning 5 seconds after the signal is no longer present.
When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel.
To resume scanning, quickly press the button.
CALL ALERT
Your XT511 Series can transmit a call alert for a fixed length of time. To send a call alert, press the CALL/LOCK button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation.
The XT511 has 5 call alert selections.
Page 11 | www.midlandradio.com |
