Cleaning and care
Changing an overhead light
The halogen lights become very hot when in use.
They can cause burns even after being shut off for some time.
Allow them to cool down for a few minutes before changing them.
Disconnect the hood from the electrical supply before replacing the lamps (see "IMPOARTANT SAFETY INSTRUCTIONS").
Remove the grease filters.
Turn the bolt counterclockwise as far as it will go. The halogen lamp will then drop down towards you.
Turn the light counter clockwise and pull it out.
Replace it with a new lamp of the same type: GU/GZ 10, 120 V, 50W. Refit the lamp by reversing the steps shown above. Please observe manufacturer's instructions.
Replace the grease filter.
22
