Cleaning and Care
^Press the foot pedal and "iron" the new cloth around.
Do not let the cords get under the cloth as it turns.
After the roller has gone through three or four revolutions and the end of the ironing cover is under the heater plate:
^Turn the rotary iron off while keeping the foot pedal pressed down.
The ironing cover is held firmly in place with the heater plate which is still lowered.
^Tighten the cords at the left and right hand sides of the roller, tie together and tuck in.
^Put the feed board back in place.
^Turn the rotary iron on - the heater plate will rise.
27
