First steps to use
Setting the clock
^Turn the rotary selector until the desired clock format (12 hour or 24 hour) appears in the display.
The setting has now been saved.
Setting the time of day
^Turn the rotary selector until the current hour appears. Confirm with OK.
^Repeat for the minutes. Confirm with OK.
The setting is now saved.
SET UP SUCCESSFUL will now appear in the display.
^Press the OK button.
If the water container needs to be filled the following message will appear in this display:
FILL WATER CONTAINER
AND PLACE IN MACHINE
^Fill the water tank with cold, fresh tap water.
The following now appears in this display:
SYSTEM FILLING UP
OPEN THE VALVE
^Turn the valve to the I symbol.
^Turn the valve to 0, when prompted in this display.
Water hardness
The hardness of the water used in the coffee system must be determined and programmed into the appliance. The water hardness will determine how frequently the unit must be descaled to maintain the coffee system properly. The machine monitors the volume of water passing through it in conjunction with the hardness of the water and will indicate when descaling is necessary. Your local water authority can tell you the hardness of your tap water or you can measure it yourself using the enclosed test strip.
^Place the test strip under your kitchen tap for a second and shake off any remaining water. The result is visible in about 1 minute.
12
