![](/images/new-backgrounds/1074147/7414761x1.webp)
Setting the serving size
The amount of water used for each serving of espresso, coffee or hot water can be set to suit your taste and cup size.
There is a maximum amount of water that can be programmed for each type of drink. The water flow will stop automatically when the maximum amount of water has been reached. The maximum amount of water will the be saved for that drink.
To program the serving size you can either:
–use the or buttons, or
–select program the amount from the settings menu.
If there is not enough water in the water tank, the process will be stopped and the amount programmed will not be saved.
Programming the amount using the or buttons
^Press and hold or (as desired) for approx. three seconds.
^Place a cup under the coffee dispensers.
^Press and hold the or until PROG. THE AMOUNT appears in the display.
The selected drink will be prepared and SAVE will appear in the display.
^Press the OK button when the cup has been filled to the desired level.
The serving size set will now be dispensed every time the selected drink is prepared.
TIP Programming can be canceled as long as CANCEL appears in the display.
31