Cleaning and care
Burner | Reassembling the burner |
Do not clean any parts of the burner in a dishwasher.
The burner can be dismantled and cleaned when cool.
Remove the burner parts and wash them in a solution of warm water and liquid dish soap. Dry them thoroughly. Make sure that the flame holes are clean and completely dry.
Wipe the burner base clean with a damp cloth and then dry.
Gently wipe the ignitor and ignition safety control with a slightly damp cloth, and then wipe dry.
Do not let the ignitor get wet. If it gets wet it will not spark.
After cleaning dry all surfaces with a clean cloth.
Place cover plate over burner base so that the ignitor and the ignition safety control extend through their respective holes in the cover plate. The cover plate must sit evenly over the burner base.
Do not use a warped cover plate.
Place the burner base in position above the cover plate making sure that pins slot into their respective holes in the burner head .
Place burner cap in position.
Be careful not to mix up the parts.
17
