Burner
The burner can be dismantled and
cleaned when cool.
^Remove the burner parts and wash
them in a solution of hot water and
liquid dish soap. Dry them
thoroughly. Make sure that the flame
holes are clean and completely dry.
^Wipe the burner base clean with a
damp cloth and then dry.
^Gently wipe the ignitor and ignition
safety control with a slightly damp
cloth, and then wipe dry.
Make sure that no liquid gets into
the appliance.
Reassembling the burner
^Place the burner head jonto the
burner base m, making sure that the
thermocouple kand ignitor lalign
through the holes in the burner head.
The burner head must fit into place
properly.
^Fit the burner ring i.
^Seat the burner caps gand hinto
place.
^Put the grates in place.
Be careful not to mix up the parts.
Cleaning and care
18