Miele CS 1112 E dimensions Page 3 of, Location Codes, Product and Cut-out Dimensions

Product and Cut-out Dimensions	Page 3 of 4
CS 1112 E Ceramic Double Burner CombiSet

The illustration above represents the attachment of spring clips 1 and support bars 2 for 3 appliances

An additional support bar is required for each additional appliance. The position for the attachment of an additional support bar depends on the width of appliance B.

Spring Clip installation	Spring Clip installation
on wood or solid	on a granite
surface countertop	countertop
Place the supplied	Position and attach
spring clips 1 and the	the spring clips 1 and
support bars 2 at the	the support bars 2
marked positions as	with strong double-
shown above, by	sided tape 3
laying them on the	Coat the side and
upper edge of the cut-	lower edges of the
out and then securing	spring clips with
them with the 1/8” x 1”	silicone.
(3.5 x 25 mm) screws	Fill the space between
(supplied)	the support bars and
Location Codes	the countertop with
	silicon
1 – Spring Clips
2 – Support bars (Accessory, item - 27996029D CSZL 1500 (Includes cover 4))
3 – Space between support bar and countertop
4 – Cover
Notes
All installations must be done in accordance with local codes.
Drawing is not to scale	Specification Sheets OJS 02212012