Safety features
Overheating protection
The induction coils are fitted with an overheating protection feature. This prevents the induction coils from overheating by:
–If the booster function is being used, it will be switched off.
–If the temperature continues to rise after the booster function is switched off, the power level will be reduced.
–If the temperature still continues to rise after the power level has been reduced, the appliance will switch off and an H will appear in the display.
^Turn the control knob to "0".
Once the H has gone out the combiset can be used again as normal.
If the control knob is not turned back to "0", C and 0 will flash in the display once the burner has cooled. To use the combiset again, first turn the control knob to "0".
Overheating can be caused by:
–using the appliance for too long at the maximum power level.
–there being insufficient ventilation to the appliance.
If a drawer is installed directly under the combiset, sufficient space must be kept between the drawer and its contents and the underside of the appliance in order to ensure sufficient ventilation of the appliance.
If the overheating protection feature triggers again, contact Miele Technical Service.
16