Installation
Attaching the canopy | Connecting the exhaust duct | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
^Hang the canopy from the motor assembly by placing the holes at the rear over the hooks on the lower edge of the assembly. Be careful not to pinch any wires.
^Secure the canopy by guiding the 2 remaining screws through the locking plate and the holes in the motor assembly (see illustration). Tighten the screws.
^Connect the ductwork to the exhaust connection using appropriate measures for the type of ductwork being installed (hose clamp, duct tape, etc.).
^Direct the duct through the back wall or the ceiling.
31
