Installation accessories
a2 recirculation vents (recirculation mode only)
b2 protective shields
prevent scratches to the chimney dur- ing installation.
c1 diverter (recirculation mode only)
d1 flex hose for connecting the di- verter to the exhaust connection.
e2 hose clips for securing the ducting.
f1 reducing collar
for use with 5" (125 mm) exhaust ducting.
g1 non-return flap for vented air extraction only.
hUpper retaining plate secures the chimney extension.
iMiddle retaining plate for addi- tional stability of the chimney.
jLower retaining plate secures the canopy and motor assembly.
k2 support angles to secure the active charcoal filter in recirculation mode.
8 large headed screws 5 x 40 mm
for securing the retaining plates and the canopy.
(S8 wall anchors included in the pack- aging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the motor assembly.
2 screws 3.9 x 7.5 mm for securing the chimney.
1 allen wrench
for adjusting the unit height
Caution: During the installation pro- cess, please be careful of sharp edges that can cause harm.
1 lever for dismantling the chimney
Installation instruction sheet
27