![](/images/new-backgrounds/1074130/7413067x1.webp)
Installation
Attaching the chimney extension
The use of a chimney extension, allows the hood to be installed at various dis- tances from the ceiling.
^Remove the protective foil from the chimney extension.
^Bend the top hanging tabs 45° in- wards. This will make installing the chimney extension easier. Be careful of sharp edges.
^Pull the chimney extension slightly outwards and snap over the upper retaining plate B.
^Secure the chimney extension to the upper retaining plate with two
3.9 x 7.5 mm screws.
^Fold the protective shield at the top.
^Remove the adhesive backing from the shield.
^Stick the shield to the chimney exten- sion so that it is smooth and flush with the bottom.
34