Installation
Attaching the chimney
^Remove the protective foil from the chimney.
^Pull the chimney apart slightly and slide it over the chimney extension. Do this carefully to prevent scratch- ing the two pieces.
^Slide the chimney down about 3/4" (2 cm) into the canopy.
^Align and adjust the chimney.
^Remove the protective shields.
^Secure the chimney to retaning plate A on both sides with two 3.9 x 7.5 mm screws.
^Remove the protective foil from the canopy.
If the chimney is not tall enough an optional chimney extension can be ordered. See "Appliance dimen- sions".
^Before using the appliance remove the grease filter and remove the pro- tective foil from the filter frame. Re- turn the filter.
35
